Hytera HR1062 DMR Repeater | Digital & Analog 1U

When your team depends on clear, uninterrupted communication, the Hytera HR1062 DMR Repeater delivers. This compact 1U repeater fits neatly into a standard rack while providing the power and flexibility of a full-size system.It supports two simultaneous TDMA voice channels on a single frequency, effectively doubling your network capacity without needing an extra license. Whether your team is still on analog radios or has already moved to DMR digital, the HR1062 handles both automatically.The built-in AC/DC auto-switching power supply means no external adapters are needed. If your main power fails, simply connect a 12.5V backup battery to the DC input and the repeater switches over automatically — keeping communications alive when it matters most.For larger deployments, the integrated Ethernet port allows you to link multiple repeaters across an IP network, covering large campuses, high-rise buildings, or multi-site operations with the right software licenses.Security is built in from the start. Basic ARC4 encryption is included, and AES256 over-the-air encryption is available via an optional software license for organizations that require higher-level protection.Key Features50W adjustable power output (5W–50W) for scalable coverageCompact 1U rack-mount design with integrated power supplyDual TDMA voice channels — double capacity, same frequencyAuto-detects and switches between analog and digital modes100% continuous duty cycle with variable-speed cooling fanAI-based noise cancellation for crystal-clear audioAC/DC auto-switching with built-in battery backup supportARC4 encryption included; AES256 available via licenseEthernet RJ-45 port for IP network and multi-site connectivitySupports XPT trunking and DMR Tier III (license required)64 channels supportedTwo accessory ports for expanded connectivityAvailable VersionsHR1062-U1 — UHF (400–470 MHz)HR1062-V1 — VHF (136–174 MHz)What’s IncludedHytera HR1062 RepeaterAC Power CordDC Power CableUser Manual2-Year Manufacturer’s WarrantyTechnical SpecificationsPower Output: 5–50W (adjustable)Frequency: UHF 400–470 MHz / VHF 136–174 MHzChannels: 64Form Factor: 1U rack-mountDimensions: 1¾” x 19″ x 14¾”Weight: 17 lb 10 oz (8.0 kg)Duty Cycle: 100% continuousPower Input: AC and DC with auto-switchingEncryption: ARC4 (included); AES256 (license required)Connectivity: Ethernet RJ-45, two accessory portsCooling: Advanced heat sink with variable-speed fanProtocols: Analog Conventional, DMR Tier II, XPT Trunking, DMR Tier III (licensed)Warranty: 2 years (manufacturer)Compatible Use CasesManufacturing plants and warehouse operationsConstruction sites with wide outdoor coverage needsHotels, hospitals, and large commercial facilitiesPublic safety and emergency response teamsMulti-floor or multi-building campus environmentsOrganizations transitioning from analog to digital radioFrequently Asked Questions About Hytera HR1062 DMR RepeaterCan the HR1062 work with my existing analog radios?Yes. The HR1062 automatically detects whether an incoming signal is analog or digital and switches modes accordingly. This means you can keep using your current analog radios while gradually upgrading your fleet to DMR digital — no disruption to daily operations.Does the HR1062 need an external power supply?No. The repeater includes a built-in AC/DC power supply that plugs directly into a standard wall outlet. There is no need for a separate external power adapter, which also saves rack space.What happens if the power goes out?If you connect a 12.5V backup battery to the DC input, the HR1062 will automatically switch to battery power when AC power is lost. This keeps your communication network running during outages.Can I connect multiple HR1062 repeaters across different locations?Yes. The built-in Ethernet RJ-45 port allows the repeater to connect to an IP network. With the appropriate software licenses, you can enable IP Site Connect for multi-site linking, XPT distributed trunking, or DMR Tier III trunking to cover large geographic areas or complex facilities.